by Reece @ DI

Note from Sunset North Car Wash &Detail Center: If this doesn’t sound like a fun way to spend an afternoon, have our Pro Detailers know how to restore your headlights at all four locations!

 

headlight half polishedHeadlights take a beating from not only dirt and grime, but harmful UV rays. After years of driving and exposure to the elements, that clear, crisp, plastic lens we all love can become faded and yellowed. When your lights begin to look like this you are losing a majority of your lighting visibility, which is a huge safety concern when driving at night.

Below is a set of headlights from one of our employees and while they are certainly not the worst looking headlights we have come across, they are due for a refresh.

How to Restore Your Headlights

Before polishing, make sure you thoroughly clean the surface. This includes washing away dirt and grime, along with claying to remove embedded contamination. Whenever we plan on polishing a surface, the rule of thumb is to always use the least aggressive pad and polish combo to start. Perform a test spot on the surface and find what combination will provide you with the results you are looking for.

Now onto the lights, we reached for our Flex PXE 80 12-EC 2.5 Cordless Polisher, a Buff and Shine
Uro-Fiber Microfiber Finisher Pad and The Last Detail The Final Polish. This combination is extremely light and after only a few passes it was clear we needed a much stronger combination.

We jumped right to the Menzerna 300 and a Lake Country Purple Foamed Wool Pad. This combination was great, but a second pass with the Rupes Coarse Wool Pad added even greater results.

Now here is where it gets interesting. No matter what detailing step you are working on, there are products designed for that specific area. However, the beauty of detailing is that you can sometimes find products designed for one area that work great on something completely different and unplanned. During this headlight restoration we had a few spots that were severely stained and oxidized. It was clear that wet sanding would be needed to remove them, but I was lazy and was looking for another way. In comes the Lake Country Glass Polishing Disc!

This disc is designed for glass polishing as the name suggests, but it is still less aggressive than wet sanding. I would not recommend using these on painted surfaces, but for the headlights I figured it would not hurt to give them a try. We paired them with the Menzerna 300 and it added an extra level of correction to really take the correction to the next step.

We were extremely happy with the results with this step and went right into finishing the surface down. We followed up with the Rupes Coarse Wool Pad and the Uro-Fiber Finisher Pad with Rupes Uno Protect to finish the headlights off. We opted for the UNO as it is a light polish, but left behind some protection on the headlights when finished. Take a look at the final results!

Overall it took a little testing, but we found a great three step process that improved the look and clarity in these headlights drastically. The only way to add to the results would be to wet sand and that could be an option in the future, but for now these results are exactly what we were looking for.

I hope you enjoyed this read and remember, do not be afraid of performing a test spot or trying out new products. You might really enjoy what comes of this testing while learning how to restore your headlights!

SEE ORIGINAL STORY HERE

Discussion

Leave A Comment